
ServicesPatio Doors
Patio Door Replacement in Ponder, TX
A slider that grinds on its track or a French door that will not latch gets swapped for a new unit that glides, locks and keeps weather out. Floors inside and beds outside are covered first, and you hear what each step means for your home that day.
Why the whole door unit gets replaced
Of all the openings in a house, the patio door is usually the biggest one that moves. It holds two large panes of glass, a sill that takes foot traffic and weather, and rolling or hinged panels that must stay square to seal. Once the frame racks, the rollers wear into the track or the glass seal lets go, the unit loses its fit, and fixing a single part seldom restores it.
We install complete new patio door units: sliding doors in vinyl or fiberglass frames, and hinged French-style doors. Each one arrives with its own frame, sill, panels and weatherstripping, and we set it level and plumb before flashing and sealing it. Our team has over 10 years of experience fitting doors into openings that are rarely perfect, including ones where the old frame was shimmed crooked to hide a slab that shifted.
If your windows or front door also need work, the same visit can cover window replacement or entry doors, so you get one plan instead of three.
What comes with a new patio door
Slider or hinged, fit to your room
We go over two-panel and multi-panel sliders alongside hinged French doors. Which one fits comes down to swing room, where your furniture sits and how you use the patio.
Tempered, low-E insulated glass
Each new door has dual-pane insulated glass with a low-E coating that turns back a large share of summer heat. Code calls for tempered safety glass in doors, and that comes standard.
Full tear-out and a sloped sill pan
The old frame comes out down to the rough opening, and we check the subfloor and slab edge for rot or high spots. A sloped pan under the new threshold sends any water that slips beneath it back outside instead of into your flooring.
Flashing, foam and finished trim
We lap flashing tape like shingles along the sides and head. Low-expansion foam fills the frame gap without bowing the jambs, and trim inside and out is finished to match.
Floors and plants protected
We lay runners and drop cloths along our path, and cover or tie back beds and plants near the patio. The old door leaves with us, and we vacuum before we go.
Warranty that transfers
Each patio door we install has a limited lifetime warranty on labor and product that goes to the next owner if you sell.
Signs your patio door needs replacing
The panel drags or jumps the track
When a slider takes two hands to open, the rollers have usually worn and cut a groove into the bottom track. Once the track itself is damaged, a full new unit is the fix that lasts.
Fog between the panes
Haze or droplets between the glass mean the insulated seal has failed and the gas fill has leaked out. That pane no longer insulates, and matching glass for an older door can be hard to find.
Drafts and daylight at the edges
Light past the weatherstripping or air on a windy day usually means the frame is out of square. Clay soil that swells and shrinks with the seasons can shift a slab enough to rack a door frame over the years.
Water stains at the sill
Soft flooring, swollen baseboard or dark stains beside the door point to water getting under the threshold. Missing or failed sill flashing is the usual cause, and it can only be corrected with the frame out.
A lock that will not catch
If you have to lift or shove the panel to engage the latch, the panels and frame no longer line up. On a back door that often stays out of sight, that is a security problem as much as a nuisance.
The hottest room in the house
Single-pane or early dual-pane glass lets a lot of afternoon heat through. If the room by the patio runs warmest, the door glass is likely part of the reason.
Steps in a patio door project
- 1
Free in-person consultation
We visit, measure the rough opening, and look over the sill, slab and framing. You receive a written quote with each line priced, and we can explain $0 Down on the whole project and our 0% Financing options if they interest you.
- 2
Ordering and scheduling
Each patio door is made to your measurements, so the order goes in after you approve. Once it is delivered, we phone to book install day and let you know how much open space we need indoors and out.
- 3
Protect, remove and prepare
First we put down floor runners, drop cloths and plant covers. Next the old door is removed, the opening is inspected, the sill pan goes in and the sides are flashed.
- 4
Set, seal and adjust
We shim the new frame level and plumb, fasten it, foam it and trim it. Rollers or hinges and the strike are adjusted until the panels glide or shut and lock easily.
- 5
Walkthrough and cleanup
You see how the lock and screen work and how to keep the track and weatherstripping clean, and we clear the area. Most single doors go in within a day, though subfloor rot can stretch it.
What moves the price of a patio door
Each patio door quote we write is broken out line by line, so you can see what every part of the job costs. Most of the price comes from the door you choose and from the state of the opening once the old frame is out. If we find hidden damage, we show it to you and agree on the fix before any extra work starts.
- Door style and panel count
- Hinged French doors carry more hardware and take more adjusting than a two-panel slider. Three- and four-panel units and oversize openings cost more to build and to set.
- Frame material and glass options
- Vinyl frames cost less than fiberglass, which keeps its shape better in hard afternoon sun. Glass coatings, grids and between-the-glass blinds also change the number.
- What is under the old sill
- A rotted subfloor, a damaged sill plate or a slab edge that is out of level has to be corrected before a new door will seal. We can only see the full extent once the old frame is removed.
- Resizing or restyling the opening
- Making the opening wider, or trading a slider for a pair of hinged doors, calls for new framing and often a new header. If that change needs a permit, we pull it and set up the inspection.
Questions about patio doors
Something not covered here? (940) 308-2581
Could my house be left open overnight?
No. The old door stays in until the new one is at your home and inspected. If hidden rot makes the job run long, we close up the opening before leaving and explain what the next morning looks like.
Is a slider or a French door better for me?
A slider never swings into the room, so it works where furniture sits near the glass. French doors give a wider opening and a classic look but need room to swing. We measure for each at the consultation so you can weigh them in your own space.
Who covers damage that happens during the install?
Covering floors and plants before work begins keeps damage rare. If it does happen, the cost isn't yours, since we are fully insured. We can walk through the coverage during the visit.
How does the warranty work?
Labor and product on your new patio door are covered by a limited lifetime warranty. It moves to the next owner if you sell, which can help the sale. You get the written terms from us before the job begins.
Do you offer ways to pay over time?
Yes. There is $0 Down on the whole project, plus 0% Financing options. During your free in-person consultation we explain both, so you can choose with the complete quote in front of you.
Will water stop getting in under the threshold?
Usually, since leaks at the threshold mostly come from sill flashing that was never installed or has failed. Each door we put in gets new flashing and a sloped sill pan. If the subfloor is already water-damaged, we fix it first and show you the damage.
Get a patio door that slides and seals again
We will measure your opening, check the sill and framing, and give you a written quote at no cost. Your floors and plantings stay covered from the first step to the last.