Skip to content

Floors covered, beds protected. Free consultation: (940) 308-2581

(940) 308-2581
Installer drilling at the top of the hinge side of a new white storm door on a brick home's front porch, with a tool bag, trim pieces and a ladder nearby

ServicesStorm Doors

Storm Doors in Ponder, TX

We fit storm doors that close square, seal tight against the frame and protect the entry door behind them. We measure your opening, explain each glass and screen option, and keep your porch and flower beds clean while we work.

How a Storm Door Protects Your Entry

A storm door mounts to the outside of your entry door's frame and puts a panel of glass or screen in front of the main door. That panel takes the wind-driven rain and hail first. With the screen in, you can leave the main door open for a breeze and keep bugs out.

Which style fits depends on the door behind it. Put a full-view glass storm door over a dark steel or vinyl-clad entry door facing west or south, and the air space between them can get hot enough to warp weatherstripping and blister paint. So we check sun exposure and the entry door's material before we suggest a model. Sometimes the better answer is a ventilating door or a lighter entry door color. If the entry door itself is worn out, our entry doors page explains replacing it first.

Our team has over 10 years of experience hanging doors on new brick builds and on older homes whose frames have shifted out of square.

Technician in a cap points to a crack in a white-framed window on a brick house wall while the homeowner watches, with a tool bag and caulk gun below

What Your Storm Door Installation Includes

  1. 01

    Measuring the opening in three places

    We measure width and height at several points and check the brick mold for flatness. Few openings are perfectly square, and the measurements tell us whether a standard size will seal or whether the frame needs shimming.

  2. 02

    Z-bar and hinge rail set plumb

    The hinge-side Z-bar carries the door's weight. We set it plumb and fasten it into solid framing so the door doesn't sag and drag the sweep within a season.

  3. 03

    Drip cap, expander and sweep

    The drip cap sheds water off the top. The bottom expander is adjusted to meet your threshold so there is no daylight gap. The vinyl sweep closes off the last of the draft and keeps insects out.

  4. 04

    Closer and wind chain adjusted

    We tune the pneumatic closer so the door latches without slamming. We also fit a wind chain or a closer with a hold-open stop, so a strong gust can't throw the door back against the house.

  5. 05

    Removing the old door and cleanup

    If an old storm door is there, we take it down, fill the old screw holes and haul it away. Drop cloths go down inside and out. We sweep up metal shavings before we leave.

Questions about Storm Doors?

Call(940) 308-2581

Signs It Is Time for a New Storm Door

  • The closer no longer pulls the door shut

    A leaking pneumatic cylinder lets the door hang open or slam. Once the door has been slammed for a while, the hinge rail and latch are often bent as well.

  • Daylight around the edges

    A gap at the sweep or along the latch side means the frame has racked or the seals have shrunk. Either way, the door has stopped buffering your entry door.

  • Cracked glass or torn screen panels

    Older doors with non-tempered glass or panels that no longer fit their channels are worth replacing rather than patching.

  • A faded or blistering entry door behind it

    Peeling paint or warped weatherstripping on the main door can mean heat is building up between the two doors. A different storm door style can stop it.

  • No storm door on an exposed entry

    If wind-driven rain reaches your front door's threshold or the finish weathers fast, adding a storm door gives that door a long-term shield.

How Installation Day Runs

  1. 1

    Free in-person consultation

    We come out, look at your entry door and frame, and note which way the door faces. We show you glass, screen and hardware options and explain the trade-offs. You get a written quote.

  2. 2

    Protecting your entry

    Before any tools come out, we lay drop cloths on the porch and inside the foyer. Our cutting station goes away from your beds and shrubs so the plants stay intact.

  3. 3

    Hanging and fitting

    We trim the Z-bar to length, hang the door and set the drip cap, expander and sweep. Then the handle set goes on, plus the deadbolt if your model has one. Most single doors take a few hours.

  4. 4

    Walkthrough before we leave

    We cycle the door several times while you watch so you can see it latch cleanly. We demonstrate the glass and screen panel change if your model uses them and point out the closer's adjustment screw. Then we clean up and haul the old door away.

What Sets the Price of a Storm Door

Two things drive the total: the model and hardware you choose, and the condition of your existing frame and brick mold. We look at both at your entry before we quote, so the number reflects your actual opening. If spreading out the cost would help, ask about 0% Financing options during the consultation, and know that $0 Down on the whole project is available too.

Frame material and core
Hollow aluminum frames cost less than aluminum-clad wood cores or steel frames. The heavier frames dent less and flex less when the door gets pushed open hard.
Glass and screen style
Full-view, mid-view and high-view doors are priced differently. A retractable screen that rolls into a cassette costs more than interchangeable panels. Low-E glass adds to the price but cuts the heat that builds up between the doors.
Non-standard openings
Custom sizes, or frames that need shims or new brick mold before the door will seal, add material and labor.
Hardware upgrades
A keyed deadbolt, a heavier closer and premium handle finishes each change the total.

Storm Door FAQs

Can heat trapped between the two doors hurt my entry door?

Yes, when a full-view glass door covers a dark door that sits in strong sun, because the air in the gap gets hot. We look at your door's material, color and which way it faces before recommending anything. If the risk is real, we suggest a ventilating model or low-E glass.

Will a storm door lower my energy bills?

It adds a layer of still air and stops drafts around an older entry door, which helps. The gain is bigger over an older wood door than over a newer insulated one. We'll tell you plainly which kind you have.

What warranty comes with the door?

Your storm door is covered by a limited lifetime warranty on both labor and product. It is transferable to the next owner if you sell your home.

What if something at my house gets damaged during the job?

We are fully insured, so you are covered. We also put drop cloths on your porch and flooring, keep our work away from your plantings, and tell you before we start anything that affects your entry.

Can you replace the entry door or patio doors at the same time?

Yes. We install entry doors and patio doors, and we do window replacement as well. If your entry door is due, we can quote both doors on the same visit so they go in together.

Get a Storm Door That Fits Your Entry

We'll measure your opening, look at the door behind it and walk you through the options at your home. We work in Ponder and nearby towns such as Denton, Argyle and Justin.